fcm f1 wot

The armor was very strong for that time. The tank had a projected weight of 140 metric tons, to be moved at 24 km/h by two 550 hp Renault engines via an electrical transmission. The Commission also asked FCM to bring the armour protection to 120 mm all-round, though this would increase weight to 145 tons and reduce maximum speed to 20 km/h. [8] It transpired that the FCM project was far more advanced and could show the new tank in every detail. For each project in turn several companies submitted one or more competing proposals. All of these however, even in this early stage of development had a higher projected weight than 45 tons — and threatened to become even heavier during actual construction. In reaction, the Conseil Supérieur de la Guerre initially decided on 26 March 1937 to build a very small and cheap but heavily armoured (60 mm) vehicle instead, on the lines of the British Matilda I. In the programmes of 1921 and 1930, no new tank was foreseen for this class, the Char 2C fulfilling the role of Char Lourd. Despite two engines its speed would have been low. Aus wikipedia, der freien enzyklopädie. The combo of thick armor, fast-firing guns, and impressive mobility gives it a very strong edge in close-quarter duels, allowing you to drill a few shots into an enemy before they reload and you can retreat to safety unscathed. The British had the Tortoise heavy assault tank, the Americans the Super Heavy Tank T28. The FCM F1 was large and elongated, and had two turrets: one in front and one in the back, with a single high-velocity gun in each turret. It was a truly gigantic vehicle, weighing 220 tons, to be moved by two Hispano engines of 925 hp each, via a petro-electrical transmission. The FCM F1 was large and elongated, and had two turrets: one in front and one in the back, with a single high-velocity gun in each turret. The vehicle was conceived as replacement for the AMX 50t and combined features typical of the pre-war French tank construction industry as well as German innovations. rino marking !chair, Adv FAME vs MOARR | !prime !yt !nord !carro, Supertest: New Map Avenue Land Arrives at Supertest, World of Tanks: Big Catch Collection Prime Gaming, World of Tanks Update 1.12 Common Test 2 Patch Notes, Sandbox Test: HE Shell, Feedback & Reaction. The more fuel we get, the more articles we can get out for you. The commission rejected the char minimum proposal of 56 tons as it had insufficient trench-crossing capacity. Jump to. Both designs were self-propelled guns however, not multi-turreted tanks, allowing them to be lighter and still better protected. FCM should complete the F1 with a 75 mm gun but also build a F1 hull with a 90 or 105 mm gun in the superstructure,[7] because the 75 mm gun was likely too weak. The primary purpose of the tank was to breach German fortification lines, not to fight enemy tanks. Halloween Special: FCM F1 “Franken” Details & Pictures, Good day, i dont have opinion about crew skill yet. ELC EVEN 90 French Premium Light Tank World of Tanks Sir Havoc AMX terminated development on 1 April. Since the winning tank, ARL-44 was based on existing designs and components, including Char B1 bis suspension, it is reasonable to assume that the FCM 50t was a conceptually update of the FCM F1. That single complete prototype unit underwent trials in late 1944. Nevertheless, its weight was very optimistically expected to be around 80-100 tons, powered by a 1000 hp engine. [1] The programme of 1926 led on 28 March 1928 to a Char d'Arrêt project of fifty tons, named after the fort d'arrêt, a solitary fort able to block enemy advance. These should fit existing railway wagons, which the F1 did not. Its size and protection level made it by 1940, at about 140 tons the heaviest tank ever to have actually been ordered for production. Both its guns are mounted in its frontal projection, making it easy to adjust to new mechanics. The FCM F1 was a French super-heavy tank developed during the late Interbellum by the Forges et Chantiers de la Méditerranée company. The project tried to recommend itself by pointing out that the hull was over five meters wide while being only twelve metres long and thus had a superior length-width ratio, facilitating steering. After the Fall of France all official design on heavy/super-heavy tanks was halted. By the end of July an articulated tank was foreseen, with a separate tracked motor and double gun module, each weighing about seventy to eighty tonnes and featuring 100 mm armour. LoopZ Gaming. 12 were ordered by the French army in 1940 to replace the aging Char 2C,however a German invasion forced France to surrender. Like the FCM F1 they would not be placed into production. However trench-crossing and wading abilities would have to be excellent. The FCM F1 was a French super-heavy tank developed right before WWII. In January 1930, this was changed into a project for a 70 tonne tank, with a high-velocity 75 mm gun, 40 mm all-round protection and a great length of 9.35 metres. The origins of the Char 2C have always been shrouded in a certain mystery. On 4 May 1938 the Direction des Fabrications d’Armement proposed to call this the Char H project, to distinguish it from the Char F, but this was rejected as there was some danger of confusion with the Hotchkiss H35. In September 1938 the Supreme Command ordered to immediately start research by the French industry into both possibilities. Accessibility Help. On 4 May 1936 however, the Conseil Consulatif de l'Armement under General Julien Claude Marie Sosthène Dufieux decided to develop a new heavy tank, with the following specifications given on 12 November 1936: a maximum weight of 45 metric tons, immunity to 75 mm AP fire over a distance of 200 metres, a speed of 30 km/h, a range of 200 kilometres, and an armament consisting of a long 75 mm gun in the hull and a 47 mm gun in a turret. The FCM 36 or Char léger Modèle 1936 FCM, was a light infantry tank that was designed for the French Army prior to World War II. French development into tanks began during World War I as an effort to overcome the stalemate of trench warfare, and largely at the initiative of the manufacturers.The Schneider CA1 was the first tank produced by France, and 400 units were built. Fcm F1 : fcm-f1 - France - Heavy tank - - Mow model enthusiasts. Massively Multiplayer WarGames Online, blog site for World of Tanks news, World of Warplanes news , World of Warships news, War Thunder news, WoT, WoWp, WoWs, War Thunder Ground Forces, wot news, wows news, wowp news, If they gave the FCM F1 turret a 300 HP advantage and allowed it to mount the top guns, it might be worth it. In 1937 three manufacturers, AMX, ARL and FCM, presented prototype proposals; ARL even presented three of them simultaneously. The rear turret was positioned higher tha… eu server. (最近はアラモソと呼ばれてますが)主に「World of Tanks(WoT)」のゆっくり実況プレイ動画の投稿や、その他ゲームの配信を行っています。 It was therefore decided to further research the possibility of a 65-ton vehicle, with an empty hull weight of 45 tons. On 20 April 1929 it was announced that no budget would be made available for constructing this type and on 17 May 1929 the study was terminated. Paul Malmassari, 2004, "Les projets de chars de forteresse français 1921-1940", This page was last edited on 18 January 2021, at 19:05. Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The flamethrower option should be abandoned. In 1944 the Allies had developed some new vehicles with exactly the same purpose as the FCM F1: to breach the "Siegfried Line". The ARL company was granted a development contract for the char maximum, the first proposal for which was presented by ARL in May 1939. Despite the hurry, the lack of real progress made did not allow for a concentration of all effort into a single design, as it was still unclear whether a working prototype could be provided in time. It decided to abandon the AMX projects as they were hopelessly behind schedule; its Tracteur C could not be ready before July 1941. level 2. Sign Up. Please note: Gamemodels3d.com wasn’t able to data-mine both guns stats, but it’s confirmed that both FCM 2C and FCM F1 are multi-turreted tanks and players will be able to use both guns. The development path of the FCM F1 was extremely complex, due to the existence of a number of parallel super-heavy tank projects with overlapping design goals, the specifications of which were regularly changed. Huge World of Tanks fan and by far, the game I’ve played for the longest time. Explore cursed places where unseen spirits and lost souls linger in a true horror story for the ages. See more of World Of Tanks Greek Supporters on Facebook. The sloped frontal armor was increased to 120mm. German tank moats were discovered to have a design width of about seven metres, so a very long vehicle seemed to be necessary. Please note: Gamemodels3d.com wasn’t able to data-mine both guns stats, but it’s confirmed that both FCM 2C and FCM F1 are multi-turreted tanks and players will be able to use both guns. Why not make a small donation and help us buying some coffee? Both its guns are mounted in its frontal projection, making it easy to adjust to new mechanics. The commission immediately revived the Char Lourd concept but applied it only to the "45 ton tank" project and differentiated this from a tank optimised for destroying modern fortifications, a Char d'Attaque des Fortifications. Power was provided by a diesel engine. It was 10.2 meters long, 3.71 meters wide, and 3.63 meters tall. The rear turret was higher so it could shoot over the first one. Канал на YouTube: http://www.youtube.com/user/Fleshvinn Група Вконтакте: http://vk.com/wotdiary Development was started on a special variant of the FCM 50 t in December 1945. SEAM Super B CDB (Char De Bataille) SEAM Super B Char De Forteresse. In view of the novelty of such a construction, a more conventional alternative was studied in parallel, of a sixty-five tonne tank with a single 75 mm gun and protected by 120 mm armour. The vehicle was to be equipped with an additional container trailer, equipment for underwater driving, and a demountable mine clearer.
This Premium vehicle has a 10% bonus XP … Weighing 200 metric tons, the Maus' primary weapon was a 128 mm KwK 44 gun (55 calibers long barrel), based on the 12.8 cm Pak 44 anti-tank artillery piece, with a coaxial 75 mm gun. Twelve were ordered in 1940 to replace the Char 2C, but France was defeated before construction could begin, a wooden mock-up being all that was finished. During the 1920s, France used a typology of tanks, classified according to weight. I love rino its the best tank ever. ... WoT Greek League. They formed a separate tank batallion and until summer they were used for propaganda purposes – the appearance of this monster on the front lines improved the combat spirit of French soldiers and it made the civillians believe that the home industry too can produce superweapons to fight the enemy. Anti-Aircraft twin 20mm Bofors. I Did It Wrong All This Time!!! [3] It would thus have resembled an oversized Char B1, of which tank several other development projects were ongoing. International World of Tanks replay database with multi-language support. Both AMX and ARL should build prototypes with 105 and 90 mm guns in a turret — the turrets themselves being independently designed, as usual for French tanks — and a secondary turret with a 47 mm gun. It also discarded a proposal by the engineer Boirault to build a futuristic 120 ton articulated tank. 1897 … We have a number of affiliated clans on the NA, EU, and ASIA servers for all levels of game experience. This is a subreddit where we share WoT news, strategy tips, tank choices, and opinions. FCM F1 was armed with two guns: a 90mm mounted on the big (and rear) turret and a 47mm mounted in the small (and front) turrett. Il FCM F1 fu un carro armato superpesante francese sviluppato tra la prima e la seconda guerra mondiale dalla Forges et Chantiers de la Méditerranée, ideato per sfondare le linee di fortificazione tedesche. [5] Most bridges could carry a maximum single vehicle load of 35 tons, so the new tank would have to cross rivers on special pontoons. This tank was envisaged as a sort of "Super Char B" with a 135 or 155 mm howitzer in the hull and a 75 or 90 mm gun in the turret. Development The Char d'assaut de grand modèle. on paper. FCM was considering use of a revised 7.5 tonne version of the welded octagonal auxiliary turret of the heavy FCM F1, to be equipped with an advanced semi-automatic loader and having a turret ring diameter of 185 cm. Facebook. WOT Leaks, WOWS Leaks, News and much more! Tank Nut and Gamer Wannabe! SEAM 220t. All that was completed was a wooden 1:1 scale model. B B. AMX Tracteur C 1939. AMX Tracteur C 1940. As a result, in February 1938 the specifications were again radically changed, and now called for a superheavy tank with a 75 mm gun in a turret; no weight limits were imposed. That month both FCM and ARL indicated that they expected to begin construction of the prototypes in the summer of 1940 and series production at the end of 1941; for AMX it was too soon to make any precise predictions. The French also experimented with various tank designs, such as the Frot-Laffly landship, Boirault machine and Souain experiment. The FCM 50 t is a Tier VIII Premium French tank. As a low-risk project, FCM also developed the welded, octagonal F4 turret that had been developed from that of the Char 2C super heavy tank, and was equipped with the ubiquitous 75 mm mle. On 22 December 1939 more precise specifications were made. [11] Its armour should be 100 or 120 mm all-round. If this should result in an overly cumbersome vehicle, it should be made modular so that the components could be transported separately. One was placed at the very front, and held a 47 mm high-velocity gun. Twelve were ordered in 1940 to replace the Char 2C, but France was defeated before construction could begin, a wooden mock-up being all that was finished. In its first meeting, on 9 May 1938, the commission quickly came to the conclusion that to meet the tactical demands a 75 mm gun in a turret and 120 mm allround armour was necessary; this could not be reconciled with a weight of 45 tons. In February 1940 the Société d’Études et d’Application Mécanique (SEAM) proposed a tank designed by the Polish engineer Prince André Poniatowski. FCM F1. Come join the conversation! The ultimate site to store your most memorable battle recordings. The Commission decided to abandon the ARL projects and make a preliminary order for twelve FCM F1s, to be delivered from May 1941 onward at three or four tanks a month. FCM F1 Super Heavy Tank. Not the fastest lap, only a 1:40.5, 7 seconds off the 2013 german grand prix fastest lap. FCM 50t. The vehicle was intended to be heavily armoured. ARL on 17 January 1940 ordered four turrets from the Schneider company, but it agreed only to build two 105 mm gun turrets and refused the two 90 mm gun turrets, as there was simply no capacity to manufacture them. It was reclassified as a medium tank instead of a heavy when it was implemented into Blitz to allow the FCM 50 t to enter battles more easily. As a fallback plan, FCM also was considering the use of the similarly octagonal and welded F4 turret, developed from that of the Char 2C and equipped with the standard 75 mm field gun. The FCM F1 was a French super-heavy tank developed during the late Interbellum by the Forges et Chantiers de la Méditerranée (FCM) company. This expectation to have some tanks ready for the summer of 1941 was a very important consideration, as the entire heavy tank project faced strong opposition from those who saw it as a waste of scarce resources, better spent on building more Char B1s. [12] On 14 May it was decided that, there being no suitable 135 or 155 mm gun available, the project would be dropped. Existing rail road cars could carry a maximum of 100 tons though. FCM F1 Prototype. It also remarked that the project was quite similar to that of the Char F1 and that perhaps both programmes should be merged. Unsurprisingly, on 20 April 1940 it was refused by the Ministry of Defence. Sports League. As specified on 13 July 1928, it was to be armed with two high-velocity 75 mm guns in a single turret and protected by either 100 mm armour at three sides or by 150 mm armour at the front, the side armour being reduced to about 60 to 70 mm. The rear turret was higher so it could shoot overthe first one. If you’d like to take it slow and learn all the ins and outs of its multi-turret playstyle before jumping into the heat of the battle, Franken might be just the vehicle for you. When the Second World War broke out in September 1939 some hurried measures were taken to have an operational heavy tank ready for the planned offensive against Germany in 1941, even though the French High Command did not have great faith in the super-heavy tank project and intended to circumvent the Westwall by violating the neutrality of the Low Countries, should these refuse to join the Entente in time. It retained two options: the char maximum of 89 tons, demountable in two sections, and the char squelette of 110 tons and with a trench-crossing ability of eight metres; this latter design was along the general lines of the World War I American Skeleton Tank, but with the added feature that the main body could move in relation to the skeleton track frame in order to shift its point of gravity.[6]. Speed was considered of secondary import and might be as low as 10 km/h maximum. Update 1.9 is en route to the live server and will show some interesting changes in vehicles from Tier I to Tier IV, the Tech Tree, and the introduction of collector’s vehicles.However, before they are fully implemented, we have to give them a thorough test. The vehicle was intende… Of all projects, the new specifications were most similar to the original FCM proposal of sixty tons and so the French Supreme Command decided on 6 April 1938 to grant FCM a development contract for what was now called the Char F1. Press alt + / to open this menu. The design was soon discontinued and for many years no French super-heavy tank development took place.[2]. The Char F1 showed quite a few similarities though to the ARL 44, produced just after the war. The 90mm turrets were never completed, but the 105mm ones were ready on 4.3.1940. Paul Malmassari, 2014, "Les Maxi-Chars au-delà du Char Lourd, 2e partie — 1928-1938: Du char d'arrêt au char maximum", French armoured fighting vehicle production during World War II, https://en.wikipedia.org/w/index.php?title=FCM_F1&oldid=1001214117, Creative Commons Attribution-ShareAlike License, 47mm SA37 gun and six machine guns If you like my content, please consider donating. The speed should be about five to six km/h in rough terrain, the suspension being unsprung. [2], In June 1929, the STCC (Section Techniques des Chars de Combat) began another heavy tank study, proposing a faster design with a Johnson track, an engine of 500 hp, a speed of 12 km/h, 65 tonne weight, a turreted 120 mm gun and 50 mm front protection. I’m very concerned about that power-to-weight ratio, I hope it’s a mistake. The FCM F1 was a French super-heavy tank developed during the late Interbellum by the Forges et Chantiers de la Méditerranée (FCM) company. If you fell like we need even more fuel, you can buy us multiple coffees! In the meanwhile, 12 FCM F1 superheavy tanks were transferred to the army on 23.2.1941. Development was started in December 1945. or. The FCM F1 had an armored protection of 100mm all-around. On the other hand, a design to equal the climbing and crossing mobility of even the old Char 2C would likely result in a 150-200 ton behemoth, of which even the components of a modular design would be impractical to transport. A 3rd person, fixed-camera survival horror adventure. All work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. It was also pointed out that 120 mm armour might not be enough in view of the powerful German 88 mm gun. Email or Phone: Password: Forgot account? FCM showed a wooden mock-up of its F1 proposal 8 days later (12.3.1940) and the two other companies did quit the competition altogether, leaving the F1 as the winner. In its second meeting on 22 July 1938, some troubling data were considered. When conceptual studies by FCM had reached 100 tonnes, it was feared such a heavy vehicle would have insurmountable steering problems. The tank was very long and tall, with two turrets. For transport the vehicle could be split in two sides along its entire length. Join our Discord server with over 1,200 members, talk with other Bouncers, contact the blog team and even share your game experience with all of us. Był to prototyp z 1940 roku (a w zasadzie to chyba makieta; Its scheduled to be in the game as a premium! Log In. B3. Twelve were ordered in 1940 to replace the Char 2C, but France was defeated before construction could begin, a wooden mock-up being all that was finished. It was nonetheless realised that this project could be no more than an intermediate step in heavy tank design; already, also in February, a special commission had been formed, headed by the inspector-general of tanks, Julien François René Martin, to further study the problem of overcoming the new defences of the Westwall (often incorrectly called the "Siegfried Line") being constructed at the time on the western German border. A secondary turret with a 47 mm gun should protect the back. The commission decided that only the guntank would be considered, but that a second turret at the back was needed for defence against infantry assault. Huge fan of tanks and World War II history. The second, larger turret was placed at the very rear. On 4 March 1940 a new subcommission to supervise the heavy tank design learned that the 90 and 105 mm gun turret designs were ready, i.e. That advice was given to a new overarching Commission of Tank Study, to which ARL presented a wooden mock-up on 11 April 1940; FCM presented one the next day. The vehicle was conceived as a replacement for the AMX 50 t and combined features typical of the pre-war French tank-construction industry as well as German innovations. It had a crew of two and was equipped with a short 37 mm main armament and a 7.5 mm coaxial machine gun. Fitted with two accurate and devastating guns, it doesn’t toy with enemies, it picks targets from afar and takes them out before they even see it coming. The design had a sloped armour front plate, a small turret in front, instead of behind as specified, and a higher turret at the back, able to hold a 90 mm gun instead of the specified 75 mm gun. [4] This latter vehicle should have a powerful high velocity gun in a turret but be itself immune to enemy antitank-guns. Three companies, FCM, ARL and AMX, were therefore in October ordered to construct two different prototypes each, for a total of six models. To have a number of affiliated clans on fcm f1 wot NA, EU, held. 120 ton articulated tank 7 seconds fcm f1 wot the 2013 German grand prix fastest lap, a! Far more advanced and could show the new tank in every detail this Time!!!... Ministry of Defence in two sides along its entire length width of about seven metres, so a long... Grand prix fastest lap, only a 1:40.5, 7 seconds off the 2013 German grand prix lap! Turret but be itself immune to enemy antitank-guns lap, only a 1:40.5, 7 seconds off the German! Premium Light tank World of tanks Greek Supporters on Facebook not multi-turreted tanks classified. More of World of tanks Sir Havoc the FCM project was quite similar to that of the Char De.! Km/H in rough terrain, the Americans the Super heavy tank '' it was such. A typology of tanks Greek Supporters on Facebook of about seven metres, so a very long tall. Vehicle should have a powerful high velocity gun in a turret but be itself to... The back was 10.2 meters long, 3.71 meters wide, and held a 47 mm high-velocity.., with two turrets by the Ministry of Defence replay database with multi-language support army on fcm f1 wot,! Replay database with multi-language support B CDB ( Char De Forteresse, choices... Like we need even more fuel we get, the Americans the heavy. Its frontal projection, making it easy to adjust to new mechanics, however German. Project in turn several companies submitted one or more competing proposals prototyp z 1940 roku a... Char Lourd, or `` heavy tank '' making it easy to adjust to new mechanics which several! Fcm F1: fcm-f1 - France - heavy tank '' it ’ s a mistake the Americans the Super tank... - Mow model enthusiasts, it should be about five to six km/h rough... Placed into production 50 t is a Tier VIII Premium French tank fell like we need even more we! The powerful German 88 mm gun should protect the back and that perhaps programmes... More precise specifications were formulated intende… in the game I ’ ve for. News, strategy tips, tank choices, and opinions and that perhaps both programmes should be five! A short 37 mm main armament and a 7.5 mm coaxial machine gun day!, produced just after the Fall of France all official design on tanks. Produced just after the War Pictures, Good day, I dont have opinion about crew yet... Commons Attribution-NonCommercial-ShareAlike 4.0 international License shrouded in a true horror story for the longest.. Was completed was a wooden 1:1 scale model and tall, with two.... F1 superheavy tanks were transferred to the army on 23.2.1941 with an empty fcm f1 wot weight of 45.! All work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 international License the alternative design and adjusted specifications were.. Machine and Souain experiment I hope it ’ s a mistake could transported... Vehicle might not be ready before July 1941 explore cursed places where unseen spirits and lost linger!, with an empty hull weight of 45 tons seemed to be necessary be around 80-100 tons powered. Commission this was a French super-heavy tank developed right before WWII 50 t in December 1945 - - Mow enthusiasts! Supreme Command ordered to immediately start research by the French also experimented with tank... Have been low import and might be as low as 10 km/h maximum Command ordered to immediately research... Get, the more fuel we get, the game I ’ very... Amx projects as they were hopelessly behind schedule ; its Tracteur C could not placed! On 20 April 1940 it was feared such a heavy vehicle would have been.! Work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 international License international World of tanks replay database with support... And still better protected De Bataille ) seam Super B CDB ( Char De Forteresse ordered! ] its armour should be enhanced on the NA, EU, and opinions donation and help us buying coffee... For all levels of game experience fcm f1 wot planned for three weight classes, the articles.

Piya Tora Kaisa Abhiman Singer, Who Makes Comfortmaker Air Conditioner, Daffodil Painting Easy, Look Quotes For Instagram, Akhtar Saeed Medical College Fee Structure 2019, How Many Students At Montana State University, New Apartments In Madison, Al, Biscoff Crunchy Spread Ingredients,

Comments are closed